My friend really wanted to upload this video about a red ring of death. I think the problem here is maybe over heating from a tight area. O_o. If the light on the brick is red, you probably just need to replace that part. It happened to me once, and the new brick fixed it right up. Grootfan85 •. No it’s not the slim model. It’s the one that looks like the OG release model. thepioushedonist • 2 yr. ago. Ah. Well I'm not sure then. In regards to the red dot, you can attempt to troubleshoot using the Xbox 360 Flashing Lights Solution but it would be recommended to also use the correct HDMI cord for connection to your television as those for other devices may have different specifications resulting in the lack of the start up screen. Xbox 360 HDMI Cable connection info. Thanks for the posts everyone, I +rep to all of you. My view on it is that it's worth a shot to xclamp fix it. But if I have to, i'll see what I can do about replacing the MOSFETs. No Related Errors available! Description: There is a problem with the Southbridge Chip usually dealing with how it connects to the mainboard (cold solder joint/bridged solder joints)(Taken from Xbox-Scene) Ive seen videos of people with the rrod, and after re-applying paste, they leave the fan out and turn the xbox on. The red lights come on, but the board heats up bonding the paste to the heatsinks. After about 20 minutes it goes down to two red lights. Hey all, so yeah I grabbed this faulty Xbox 360-e and am looking to fix up the HDMI as when the HDMI is plugged in the light flashes red but otherwise is green troubleshooting says to check with av but the e model only has a HDMI output. I have some limited soldering experience and have been snooping around here and on YouTube on info about Yes the jaspers are more reliable. MS went overboard on the jasper making sure to avoid the RROD. The Slim and E models are still very reliable and they are recommended more due to every Slim and E model being pretty reliable, whereas only the Jasper fats are very reliable, and some people might not know how to differentiate between a Jasper and other models Nov 3, 2021. #6. might not be worth fixing. a reflow or reball requires a bga station (though a heat gun may be able to do it as well, but a proper one requires one of these). the stations usually cost several hundred dollars to a grand, so you'd most likely have to send it to someone. for the price it costs to do either, it may be better to Best. •. If it's what you mentioned, I suggest you to replace it. Because it's dead and the best thing you can do with it is just selling it for parts. Btw, ofc you can repair it (if you have the right tools) but it doesn't worth it. Consumes too much time and money. What ‘tools’ are required to fix it? OZuNg.